Radio Shack 66 owner manual Timer Recording with VCR Plus+, VCR Plus+ CH SET UP, then press

16-635.fm Page 41 Wednesday, July 21, 1999 9:03 AM

2.For each station, compare the station’s guide channel number with the number you select on the TV, cable box, or VCR to tune to the station. If the numbers match, cross that station off of the list.

3.If a tape is playing, press STOP.

4.Press MENU/ACTION to display the main menu.

5.Repeatedly press or to highlight SET UP CHANNEL, then press .

6.Repeatedly press or to highlight

VCR Plus+ CH SET UP, then press .

You see this screen if you selected a cable box or direct-to-home satellite receiver as your input source.

SET UP

BLE CH

--

--

KEY

You see this screen if you selected an external antenna as your input source.

SET UP

TV CH

--

--

KEY

7.Press or to highlight the guide chan- nel you want to set, then press . The cur- sor moves to the right of the guide channel you selected.

8.Repeatedly press or to select a CABLE CH or TV CH number. Then press to set the number.

9.Repeat Steps 7 and 8 for each remaining channel number.

If the channel number is not correct, re-

peatedly press or then to select

the correct number. Then press or

to change the number or ADD/DLT to delete it.

10.When you finish, press MENU/ACTION three times to exit.

Timer Recording with VCR Plus+

Most television guides list a 1- to 8-digit num- ber called a PlusCode™ next to many of the listed programs. You can use these PlusCodes to easily program your VCR to record broad- casts.

You can set the VCR to record as many as eight broadcasts, including any timer programs you want to set up (see “Automatic Timer Re- cording” on Page 43).

You can set the VCR to record at any time on a specific day, at the same time each week, or the same time Monday through Friday.

Before you start, be sure you have set the VCR Plus+ guide channels for your area (see “Set- ting the VCR Plus+ Guide Channels” on Page 40).

Note: The VCR can record only one broadcast at a time. If you schedule recording of broad- casts on different channels that start at the same time, the VCR records the lowest timer number. For more information about timer numbers, see “Setting a Timer” on Page 44.

1.Turn on the TV and set it to the same chan- nel as the VCR’s 3-CH-4switch.

Note: If you are using a TV/monitor that is connected to the VCR’s R-AUDIO-L/VIDEO OUT jacks, set it to its video mode.

2.Insert a blank cassette, or one that you want to record over, into the VCR. The VCR turns on.

3.Repeatedly press TV/VCR until VCR appears.

41