Radio Shack 66 owner manual Viewing a Video Tape, Tape Motion Controls, Loading a Video Tape

16-635.fm Page 28 Wednesday, July 21, 1999 9:03 AM

5.Repeatedly press to highlight a chan- nel number, then repeat Steps 3 and 4 to create more call letter combinations (up to 10).

6.When you finish, press MENU/ACTION four times to exit.

VIEWING A VIDEO TAPE

Loading a Video Tape

1.Turn on the TV and set it to the same chan- nel as the VCR’s 3-CH-4switch.

Note: If you are using a TV/monitor that is connected to the VCR’s R-AUDIO-L/VIDEO OUT jacks, set the TV/monitor to its video mode.

2.Hold the cassette with the main label fac- ing up and the spine facing out from the VCR. Then insert the cassette into the VCR’s compartment and gently push the center of its spine until the VCR draws it in.

The VCR automatically turns on. If the erase- protection tab has been removed from the cas- sette, playback automatically begins (see “Erase Protection” on Page 38).

Caution: Never insert anything except a VHS video cassette into the cassette compartment. Anything else might damage the VCR.

Playing a Video Tape

1.Load a video tape.

2.If playback does not automatically begin, press PLAY. The VCR plays the tape.

28

Note: During playback, the VCR automati- cally adjusts tracking, but you can manu- ally adjust it if necessary (see “Tracking” on Page 30).

3.To choose the type of audio you want to hear during playback, press SAP/HiFi until an arrow appears next to the desired audio mode indicator (HiFi or NORMAL) on the TV screen.

Note: If you play a tape recorded on a standard VCR, the VCR plays the standard audio track, regardless of the audio output setting.

4.To stop playback before the end of the tape, press STOP.

5.To eject the tape, press STOP EJECT on the VCR.

Notes:

•If the tape reaches the end before you press STOP or STOP EJECT on the VCR, the VCR automatically stops the tape and completely rewinds it. If the erase-pro- tection tab has been removed, the VCR then ejects the cassette.

•When the VCR is off, you can press STOP EJECT on the VCR to eject a tape. The VCR turns on, ejects the tape, then turns itself back off.

TAPE MOTION CONTROLS

Fast-Forward/Rewind and Visual Search

While a tape is stopped, press FAST-Fto ad- vance the tape quickly or REW to rewind it. You cannot see the picture or hear sound when you use fast-forward or rewind, but you can use the counter to locate a specific section of tape.

Note: If you press POWER while a tape is re- winding, REWIND POWER OFF appears. The VCR automatically turns itself off when re- winding is complete.