Instead, you see:
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
Manually Setting the Clock
Follow these steps to manually set the clock if EDS is not available in your area, if you do not want the VCR to search for an EDS signal, or if you skipped tuner programming.
Notes:
•The clock must be accurately set for proper automatic timer recording. We suggest you refer to a radio station or time/temperature service for the correct time.
•If you do not press a button within 5 min- utes in Steps
1.Press MENU/ACTION to display the main menu.
RE
NEL
UE: ENGL I SH
Y
KEY
Note: To exit the programming mode at any time, press MENU/ACTION.
2.Repeatedly press 
or 
to highlight SET CLOCK, then press 
.
3.Repeatedly press 
or 
to highlight MANUAL, then press 
.
K
CK SET
Y
KEY
4.Repeatedly press 
or 
to select the correct month, then press 
.
K
:
DST : ON
Y
KEY
5.Repeat Step 4 to select the correct date, year, and hour, then press 
.
6.Repeatedly press 
or 
to select a minute that is 1 or 2 minutes after the current time, then press 
. (For example, if it is 42 minutes past the hour right now, enter 43 minutes.) This gives you time to complete this procedure before starting the clock.
Note: Your VCR uses a
7.Repeatedly press 
or 
to set DST (daylight saving time) to ON or OFF.
When you set DST to ON, the VCR auto- matically adds 1 hour on the first Sunday in April, and subtracts 1 hour on the last Sun- day in October.
8.Press 
. SET COMPLETED appears.
K
12:00PM
DST : ON
KEY
9.Review the information you entered.
If the information is not correct, move the cursor to the incorrect entry by repeatedly
pressing 
(marked to the left of REW on the remote control) or 
, then enter the correct information.
19
