English
4.2.2 Using the QLink Software
The included QLink software is a useful tool for downloading photos from your camera to your computer, and then displaying,
After successfully installing the software (see 4.1 “Installing the Digital Camera Software” on page 24), follow the steps below to get started with QLink.
1.Turn on the computer and start the QLink software.
2.Turn on the camera.
3.Connect the camera to the PC with the included USB cable. Ensure that the connection is secure.
4.Tap
5.A new disk appears in the navigation panel on the left labelled “Removable Disk.”
6.Photos and movie clips stored on your camera are displayed in the preview screen at center.
7.The buttons at the left of the screen allow you to view a slide show, e- mail selected photos, print selected photos, edit photos, change program settings, and exit the program.
8.Refer to the
.
Note
•SD memory cards in the following sizes are supported: 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, and 1GB. The DC E510 is compatible with SD memory cards manufactured by Panasonic, Toshiba, and Sandisk. Please contact your local dealer for purchasing information.
4.2.3 Using the QLink Frame
The included QLink software is also the tool for transferring downloaded frames from your computer to your camera.
After successfully installing the software (see 4.1 “Installing the Digital Camera Software” on page 24), follow the steps below to get started with QLink.
1.Turn on the computer and start the QLink software.
2.Turn on the camera.
3.Connect the camera to the PC with the included USB cable. Ensure that the connection is secure.
4.Tap