Axis Communications AXIS 225FD user manual LED Indicators, Network, Heater, Status, Power

Page 7

AXIS 225FD - Product Features 7

Power connector block - for connection of a power supply. See Power connections, on page 50.

I/O terminal connector - The I/O terminal connector provides the physical interface to one solid state relay output, two digital inputs, RS-485/422 and GND. For more information, see Unit Connectors, on page 47.

Network connector - The AXIS 225FD connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 225FD via PoE (Power over Ethernet). The camera also negotiates the correct power level when using PoE.

Serial Number - This number is used during installation.

Control Button - This button is used during the installation using the AXIS Internet Dynamic DNS Service (see the Installation Guide) or to restore the factory default settings, as described in Advanced, on page 45.

LED Indicators

After completion of the startup and self test routines, the multi-colored Network, Status, Heater, and Power LED indicators flash as follows:

		Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.

	Network	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

		Red	Flashes rapid red, together with the Status indicator, for hardware error.
		Red

		Unlit	No connection.

		Green	Shows steady green if the connected power supply can deliver the correct voltage for
	Heater		the heater (See Power, on page 58 of Technical Specifications).

		Red	Shows steady red if the connected power supply cannot deliver the correct voltage (i.e.,
		Red
			the voltage is either too high or too low).

		Green	Shows steady green for normal operation. Can be configured to flash green at intervals
			whenever the camera is accessed. See the online help for more information.

	Status	Amber	Shows steady amber during reset to factory default or when restoring settings.

		Red	Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 44).
		Red
			Rapid flash, together with the Network indicator, for hardware error.

		Unlit	When configured for “no flash” on camera access.

	Power	Green	Normal operation.

		Amber	Flashes green/amber during firmware upgrade.
		Amber	Flashes green/amber during firmware upgrade.

Image 7

Contents Axis 225FD About this Document Contents Axis 225FD Key Features Product FeaturesControl button Serial number S/N OverviewHeater LED IndicatorsPower NetworkAccess From a Browser Accessing the CameraAccessing the camera from the Internet Setting the Root PasswordSetting the Focus/Zoom Live View Axis 225FD Accessing the Camera Video Stream Types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage Settings Video and Image SettingsImage Appearance Overlay/Mask Type Overlay/Mask SettingsVideo Stream TestOverlay image/privacy mask requirements Upload and use an overlay/maskImage Formats Image Size Camera Settings Advanced SettingsMPEG-4 Settings Mjpeg Settings Use custom settings Live View ConfigExample Check Show Custom Link Upload Own Web FilesOwn home User-defined LinksOutput Buttons Default Video FormatDefault Viewer Action ButtonsHtml Examples Viewer settingsExternal Video Sequence Mode Event Servers Event ConfigurationDefinitions Click Add triggered... on the Event Types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection Object Size Port StatusReferrals System OptionsSecurity Users Security IP Address FilteringSecurity Https Security CA servers Authentication processIP Address Configuration Network Basic TCP/IP SettingsDate & Time Services Network Advanced TCP/IP SettingsDNS Configuration Host Name Configuration NTP ConfigurationLink-Local IPv4 Address Network Traffic NAT TraversalQoS Settings Network QoS Quality of ServiceNetwork Socks Network RTP Multicast/MPEG-4 Network Smtp emailNetwork Snmp Network UPnPSupport Overview LED SettingsMaintenance SupportLogs & Reports AdvancedUsing the Control Button Resetting to the Factory Default SettingsUnit Connectors Terminal Block Terminal connector block pinoutTerminal connector schematic diagram LED indicatorsPower Connector Block Power connectionsPin Function Schematic Diagram Power Terminal Block and Power Connectors Checking the Firmware TroubleshootingUpgrading the Firmware Problems setting the IP address Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Hardware problemsWeb browser Your Axis 225FD is accessible locally, but not externallyEtc, to a destination outside the local network Decode only I frames Video/Image problems generalBrowser freezes Status and Network indicator LEDs are flashing red rapidlyProblems uploading files Poor quality snapshot imagesLens Technical SpecificationsMaintenance Applications Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Axis 225FD Glossary of Terms Http API IndexRtsp