Overview, Before Starting | SECO-LARM USA EV-1726-NKGQ specs

ENFORCER DNR / DWDR / IR NVD Bullet Camera with 4-Axis Mounting Arm

Overview:	Sunshield	Mounting screw
		Mounting screw

		Hex screw

Rubber grommet

		4-Axis mounting arm
Zoom	Service	Mounting base
Focus	monitor port	Mounting base
	monitor port

Connect	OSD joystick
service monitor	OSD joystick
port connector

Mounting plate

BNC connector

DC Jack DC plug with terminal block

Important:

Do not cut DC jack or BNC connector as warranty will be voided.

Before Starting:

1.Please read this manual carefully and keep it for future reference.

2.Use the camera within given temperature and electrical limits.

3.Do not aim the LEDs directly at the eyes when the LEDs are on.

4.Do not point the camera at the sun. Heat could damage the camera, even when not in use.

5.Do not mount the camera in areas exposed to radiation, strong magnetic fields, or strong electrical signals.

6.Do not open or disassemble the camera. There are no field-serviceable parts inside.

7.Do not drop the camera or subject it to strong vibrations.

Installation:

1.Run a 12VDC or 24VAC power supply wire and a video cable with a male BNC connector through the wall to where the camera is to be mounted.

2.Temporarily connect the camera to the power supply. Do not cut the DC jack or the female BNC connector as the warranty will be voided. If needed, use the included SECO-LARM DC plug with terminal block.

3.Connect the included service monitor port connector to the service monitor port.

4.Connect the service monitor port connector’s BNC to a test monitor.

5.While watching the monitor, hold the camera against the wall or ceiling by hand where it is to be mounted, then turn the camera until it is certain that this mounting location is correct. Use a pencil to mark the location of the four screw holes in the mounting plate.

6.Mount the mounting plate and rubber grommet to the wall or ceiling using the four included mounting screws. If the wall is made of drywall, brick, or similar material, it may be necessary to use screw anchors (not included).

7.Mount the camera base to the mounting plate using the four included hex screws.

8.Adjust the camera angle. See “4-Axis Mounting

Arm” on page 2.

9.Adjust zoom and focus by moving the zoom and focus knobs on the side of the camera. Then use the OSD control joystick to adjust camera settings. (See OSD manual).

10.Disconnect the power supply and service monitor connector.

11.Put the sunshield on the camera.

12.Do a final test of the video camera and monitor.

SECO-LARM U.S.A., Inc.

EV-1726-NKGQ, EV-1726-PWGQ, EV-1726-NWGQ, EV-1726-PKGQ specifications

The SECO-LARM USA EV-1726 series of door operators expands access control technology with a suite of robust electronic locks. The lineup includes models EV-1726-PWGQ, EV-1726-NKGQ, EV-1726-NWGQ, and EV-1726-PKGQ, each designed to enhance security while offering a variety of features tailored to different user needs.

One of the primary features of the SECO-LARM EV-1726 series is its high level of customization. These door operators support various access methods, including RFID cards, numeric keypads, and traditional keys. This multi-faceted approach makes them suitable for an array of environments, from residential buildings to high-security industrial sites.

In terms of technology, the EV-1726 series employs advanced electronic locking mechanisms that provide durability and reliability. With a sturdy build, these locks are resistant to wear and tear, ensuring long-term performance even in high-traffic areas. Additionally, the series features built-in safety measures, such as automatic locking upon closure, which helps secure premises effectively.

Each model in the EV-1726 series caters to different style preferences and security needs. The EV-1726-PWGQ is equipped with a weather-resistant housing, making it ideal for outdoor installations. The EV-1726-NKGQ boasts a sleek, modern design that complements contemporary décor, while the EV-1726-NWGQ is suitable for environments that require an inconspicuous solution. Lastly, the EV-1726-PKGQ offers a package deal that combines both aesthetics and functionality.

A highlight of the SECO-LARM EV-1726 series is its compatibility with Smart Home systems, allowing users to integrate their locks seamlessly into existing home automation setups. This feature provides a heightened level of convenience, enabling remote access control via mobile devices.

In summary, the SECO-LARM USA EV-1726 series, with models such as EV-1726-PWGQ, EV-1726-NKGQ, EV-1726-NWGQ, and EV-1726-PKGQ, presents an advanced solution for secure access control. With customizable access methods, robust construction, aesthetic versatility, and enhanced compatibility with Smart Home technology, these electronic door operators set a new standard in the security landscape. Whether for residential or commercial use, the EV-1726 series is designed to meet the varied demands of today's security-conscious users.

Overview:

Before Starting:

Installation:

EV-1726-NKGQ, EV-1726-PWGQ, EV-1726-NWGQ, EV-1726-PKGQ specifications