Roper PXD1000 manual Graduations have stripes

Page 22

Graduations have stripes

Possible Cause/Solution:

If any of the symptoms described above exist, try reversing the Pixel Clock pins. The pins which should be swapped will depend on whether the pixel clock is being driven by the camera (most common) or is driven by the Frame Grabber. For example, if the camera is driving the pixel clock, try reversing the CAMCLK pins (pin 65 and pin 15), or if the Frame Grabber is driving the pixel clock, try reversing the Synthclk pins (pin 57 and pin).

22

Image 22
Contents Purchase from Imagenation Camera Configuration Files & Guides Build your own cablePXD Data Page Page Data connector J2 I/O Connector Optional Build from cable with compatible FG connectorCable kit CB-012-00 Making a data cable for 11-bit to 32-bit Cameras Cable kit CB-011-00Build from cable with compatible Camera connector PXD Configuration Application Enter Pixel clock speed from the camera specification Relationship to various pins Output formats/standards i.e. RS422, TTL, LDVS? Modes 8x1, 8x2 Channel WEN SignalData line Options Triggers methods and optionsFrame Rate Burst PCI Rate versus Sustained PCI RateEIA422-B vs. EIA-644 Input Look-up Tables LUTsPixel Clock Source Pixel Swizzling Page Possible Cause/Solution ResolutionSymptom Scatter/GatherSymptoms Graduations have stripes