Oregon ATC-2K Setting the Month, Setting the Day, Setting the Time, SD Memory Card

Page 12

Setting the Month

When adjusting the month, the “M” will be turned on. Press the 'Movie shutter button' to adjust the month. Press the Enter button to confirm, after which you would be able to adjust the day.

Setting the Day

When adjusting the day, the “D” will be turned on. Press the 'Movie shutter button' to adjust the day. Press the Enter button to confirm, after which you would be able to adjust the time.

Setting the Time

When adjusting the hour, the “H” will be turned on. Press the 'Movie shutter button' to adjust the hour. Press the Enter button to confirm the hour, after which you would be able to adjust the minute.

When adjusting the minute, the “M” will be turned on. Press the 'Movie shutter button' to adjust the minute. Click on the Enter button to confirm the time and quit this mode.

SD Memory Card

On this unit, you can use SD Memory Cards of the following capacity: 8MB to 2 GB.

To use an SD memory card, turn off the ATC-2K and insert the SD memory card. When the camera is turned on again the SD card icon will be displayed on the LCD.

The remaining time will also be displayed on the LCD. All the new captured video footages will be saved onto the SD card.

Note:

1.If there is an error on the SD memory card, the SD card icon and the letters 'Err' will be displayed on the LCD. In this case, turn off the camera and remove the SD card.

2.The SD card is equipped with a Write-Protect switch that can prevent writing and formatting to the card. The letters 'Err' will be displayed if the SD card is locked with Write-Protect switch.

3.Keep the Memory Card out of reach of children to prevent swallowing.

4.We recommend using SanDisk regular or SanDisk Ultra II SD cards.

21

22

Image 12
Contents Dear customer Camera Precautions Waterproof FeatureCold Weather Product Accessories II Technical Specifications III Computer System RequirementsMinimum System Requirements IV Camera Description Mounting the camera using the velcro strap Mounting the camera using the handlebar gripCamera Mounting Description Fixing the position of the cameraBattery Installation VI Quick StartTurning the Camera On Turning the Camera OffInserting/Removing the SD memory Card InsertRemove Taking Video FootageVII Menu Settings Different mode icons are shown in the table belowResolution 640 x 480, 320 x 240, 160 x 120 pixels resolution Frame rate fpsSetting Date/Time Clock Set Setting the YearSound Recording Deleting video footageSetting the Month Setting the DaySetting the Time SD Memory CardViii Connecting to PC Available Recording TimeTroubleshooting IX Playing back video footage on a TVATC-2K Website Theres no displayTroubleshooting Cant capture the video footage Remaining time is not accurateCant play the video footage on my television Page Oregon Scientific, Inc