HC18_manual_1_sep 9/2/05 16:50 Page 5
V) Camera Mounting Description
The ATC-1000can be mounted in a variety of different ways using the straps and Velcro patch provided. Please follow the suggested methods of mounting as follows:
To mount ATC-1000using the handlebar strap:
1.Place the handlebar grip on the handlebar.
2.Place the dual-locking grip on the handlebar grip.
3.Slide the strap through the base of the dual-locking grip and fasten around the handlebar grip.
4.Slide the ATC-1000into the dual-locking grip. You can adjust the angle of the camera by 10° at a time.
To mount ATC-1000using Velcro straps:
1.Attach the rubberized patch to the underside of the dual-locking grip.
2.Place the dual-locking grip on the helmet, and
thread the Velcro strap through its base.
3.Secure the Velcro strap by fastening it through the helmet vents.
4.Slide the ATC-1000into the dual-locking grip. You can adjust the angle of the camera by 10° at a time.
