Turning the Camera On, Method | Oregon ATC-1000 instruction

1.Turn and pull to release the cover at the end of the unit.

2.Release the battery tray by pushing the release hook with a pen or similar object.

3.Insert 4 x AAA alkaline batteries into the battery tray with the polarity in the direction as shown.

4.Replace the tray and cover.

Important: When the batteries are low, you will

see the low battery icon on the LCD display.

Always download photos to PC prior to replacing batteries to avoid memory loss.

Note:

a)Do not mix old and new batteries together. Replace all the batteries at the same time.

b)Remove the batteries if the camera is not going to be used for some time. This will save battery life.

c)Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

d)Battery installation should be done under adult supervision.

e)Do not get the camera wet.

Turning the Camera On

For your safety, do not press any buttons on the camera during sports activities.

Press the ‘On/Off’ button for 3 seconds.

The LCD display will light up.

Method 2

Plug in the USB cable and connect it to your PC. The camera will then use the USB power source.

The camera will be turned off automatically after 10 minutes of not being used.

Method 2

Press the ‘On/Off’ button for 3 seconds. The LCD display will turn off.

Note: If the camera is connected to your PC, you have to unplug the USB cable to turn off the camera.