Oregon ATC-1000 VII Camera Mode Selection, Default 640 x 480 pixels resolution, Self-Timer Mode

HC18_manual_1_sep 9/2/05 16:50 Page 8

VII) Camera Mode Selection

1.You can cycle through different shooting modes by pressing the ‘Menu’ button repeatedly. The LCD will display each mode as you press

the ‘Menu’ button.

2.Press the ‘Enter’ button to confirm the selection.

3.When you want to quit the Camera Mode Selection, cycle through the icons by pressing the ‘Menu’ button repeatedly until the selected icon stops flashing.

4.The different mode icons are shown in the table below.

Icon	Title	Description
	Self timer	10 Second timer
	Continuous shutter	Takes 3 consecutive photos.
	Delete the last picture/clip	Erases the last picture/clip taken
	Delete all photos/footage	Erases all pictures/footage
		stored in the camera
	High resolution	Large photo format/less
	(640 x 480 pixels)	storage capability
	Medium resolution	Medium photo format
	(320 x 240 pixels)
	Low resolution	Smallest photo format/
	(160 x 120 pixels)	more storage capability
	SD card	Shows SD card is being inserted
	Low battery	Battery is low when this icon appears

11

a) Default 640 x 480 pixels resolution

To change the resolution, press the ‘Menu’ button until the desired resolution icon shows on the LCD display. Press the ‘Enter’ button to confirm your selection.

b) Continuous Shutter Mode

Continuous shutter mode is activated by selecting

and confirmed by pressing the ‘Enter’ button. Press the ‘Photo shutter’ button once to start. The ATC-1000will take three consecutive photos accompanied by

three ‘beeps’. To cancel this mode reselect and press the ‘Enter’ button.

Note:

1.It doesn’t work for taking video footage.

2.This function supports photos (640x480 VGA) only.

c) Self-Timer Mode

Self-timer mode is activated by selectingand confirmed by pressing the ‘Enter’ button. Press ‘Movie shutter button’ or ‘Photo shutter button’ once to start the countdown. The ATC-1000will count down 10 ‘beeps’ and then start recording. To cancel this mode reselect and press the ‘Enter’ button.

d) Delete the Last Photo/Movie Clip

To delete the last photo/movie clip you shot, press the ‘Menu’ button until the ‘Status LCD’ displays . Press the ‘Enter’ button to confirm.

Repeat these two steps to individually delete your files.

Note: After file deletion the LCD display will adjust the remaining number of files accordingly.

12