Matrox Electronic Systems 10760-101-0200 manual

Page 2

Matrox® is a registered trademark of Matrox Electronic Systems Ltd.

Microsoft®, Windows®, and Windows NT® are registered trademarks of Microsoft Corporation.

Intel® and Pentium® are registered trademarks of Intel Corporation.

3MTM is a trademark of 3M Interconnect Solutions for Factory Automation.

All other nationally and internationally recognized trademarks and tradenames are hereby acknowledged.

© Copyright Matrox Electronic Systems Ltd., 2002. All rights reserved.

Limitation of Liabilities: In no event will Matrox or its suppliers be liable for any indirect, special, incidental, economic, cover or consequential damages arising out of the use of or inability to use the product, user documentation or related technical support, including without limitation, damages or costs relating to the loss of profits, business, goodwill, even if advised of the possibility of such damages. In no event will Matrox and its suppliers’ liability exceed the amount paid by you, for the product.

Because some jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation, may not apply to you.

Disclaimer: Matrox Electronic Systems Ltd. reserves the right to make changes in specifications at any time and without notice. The information provided by this document is believed to be accurate and reliable. However, neither Matrox Electronic Systems Ltd. nor its suppliers assume any responsibility for its use; or for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent right of Matrox Electronic Systems Ltd.

PRINTED IN CANADA

Image 2
Contents Matrox Meteor-II /Camera Link Page Contents Hardware reference Appendix B Technical information Page Introduction Matrox Meteor-II /Camera Link TTLOr Matrox Genesis processor board1 MIL-Lite Matrix/bar code reading, and calibrationAcquisition, transfer, display control, and archiving Processing, analysis, and archivingWhat you need to get started Inspecting the Matrox Meteor-II /Camera Link packageTo your computer and all peripherals Installation overview Introduction Hardware Installation Installing Matrox Meteor-II /Camera Link Screw Metal Plate BIT PCI Board Slot Hardware installation Connecting external devices VMChannel. Used to send data to another Matrox boardMatrox Meteor-II /Camera Link for PC/104-Plus Connectors pinout Reference manual for pinout informationHardware installation Installing software Installing the software Using multiple Matrox Meteor-II Boards Multiple board installation Grabbing simultaneously from different boardsGrabbing from two Matrox Meteor-II boards Using multiple Matrox Meteor-II boards Hardware reference Matrox Meteor-II /Camera Link hardware reference Matrox Meteor-II /Camera Link grab sectionLUT Board are as follows MaxIs specified by the DCF Each of the video input Camera Link connectorsSection earlier in this chapter Three waysData interfaces Video Interface AsicPCI interface Hardware reference Appendix a Troubleshooting Troubleshooting Common problems and solutionsNot enough memory to allocate buffer under Windows NT IRQ conflicts Contacting Matrox Appendix a Troubleshooting Appendix B Technical Information Technical information Connector pinouts for Matrox Meteor-II /Camera Link for PCI Pinout for the two Camera Link connectors is as follows PIN SignalMedium Configuration Pin Signal Same type and lengthHDT44P Pinout of the 9-pin DB9 female connector is as follows Pin Signal DescriptionTop view of board Dgnd DATA4 DATA5 DATA6 DATA7 DATA8 DATA9 Extender board Specifications Min. of 6.3 mA recommended Max. of 10 mA recommended Environmental Appendix B Technical information Appendix C Glossary Asic DCF See also progressive scanning Also known as non-interlaced. See also interlaced scanning See also horizontal sync Index Uart Industry Canada Compliance Statement Regulatory ComplianceFCC Compliance Statement EU Notice European UnionPage Product support Dorval, Quebec H9P 2T4Page Product Assistance Request Form Describe the problem