Matrox Electronic Systems 10760-101-0200 manual Matrox Meteor-II /Camera Link, Ttl

8Chapter 1: Introduction

Matrox Meteor-II /Camera Link

The Matrox Meteor-II /Camera Link frame grabber acquires digital video from cameras compliant with the Camera Link Specification. The board is available for the PCI and PC/104-Plusform factors. The information in this manual pertains to both form factors, unless otherwise stated.

		Optotrig		Userinput1			TTLtrig
		Opto-			TTL
		coupler		buffers
On a separate
bracket (PCI)
DB-9	TTLtrig			TTL buffer
trigger	Optotrig				Opto-
connector					coupler
	LVDStrig
					LVDS
	User input0			receivers
	User input1
	Hsync output_1
	Hsync output_2
	Vsync output_1
	Vsync output_2
	Clock output_1
	Clock output_2				LVDS
	CC1_1
DB-44	CC1_2			drivers
connector	CC2_1
	CC2_2
	CC3_1
	CC3_2
	CC4_1
	CC4_2
	TTLCamCtrl(3)
						TTL
	TTLCC1
	TTLCC2			buffers
	TTLVSOUT
	TTLHSOUT
	CC1
	CC2					LVDS
	CC3				drivers
First	CC4
	DATA (24)			Channel
MDR-26
	& syncs (4)			Link # 1
connector
	Clock			receiver
	SerTFG
			LVDS driver
	SerTC		& receiver
	CC1
	CC2					LVDS
	CC3				drivers
Second	CC4
	DATA (24)			Channel
MDR-26
	& syncs (4)			Link # 2
connector
	Clock			receiver
	SerTFG
			LVDS driver
	SerTC		& receiver

Userinput0	LVDStrig	Clockoutput 1	Clockoutput 2	Vsyncoutput 2	Hsyncoutput 1	Hsyncoutput 2
LVDS				LVDS
receivers
			drivers
			PSG

UART

For PC/104-Plusform factor

Auxiliary sync and control connector

Interfaces to DB44 connector of Matrox 4Sight-II chassis

VM Channel (PCI only)

LUT	32
4 256x8-bit
2 1Kx10-bit
2 4Kx12-bit

		VIA
		64
Video transfer			32
	memory
	(32 MB)

Host 32-bit PCI bus