LevelOne FCS-5030 user manual Rtsp SDP

PARAMETER	VALUE	DESCRIPTION
Method	addallow	Add a set of allow IP address range to server. Start
		and end parameters must be specified. If the index
		parameter is specified, it will try to add starting from
		index position.
	adddeny	Add a set of deny IP address range to server. Start and
		end parameters must be specified. If the index
		parameter is specified, it will try to add starting from
		index position.
	deleteallow	Remove a set of allow IP address range from server. If
		start and end parameters are specified, it will try to
		remove the matched IP address. If index is specified, it
		will try to remove the address from given index position.
		[start, end] parameters have higher priority then the
		[index] parameter.
	deletedeny	Remove a set of deny IP address range from server. If
		start and end parameters are specified, it will try to
		remove the matched IP address. If index is specified, it
		will try to remove the address from given index position.
		[start, end] parameters have higher priority then the
		[index] parameter.
start	<ip address>	The start IP address to add or to delete.
end	<ip address>	The end IP address to add or to delete.
index	<value>	The start position to add or to delete.
return	<return page>	Redirect to the page <return page> after the parameter
		is assigned. The <return page> can be a full URL path or
		relative path according the the current path. If you omit
		this parameter, it will redirect to an empty page.

RTSP SDP

Note: This request requires viewer access privilege

Method: GET/POST

Syntax:

http://<servername>/viewer/<0~(n-1)>/<network_accessname_<0~(m-1)>>