transmission_mode | Tx, | 0/7 |
| Rx, |
|
| Both |
|
|
|
|
network_wire | <boolean> | 0/7 |
|
|
|
network_wireless | <boolean> | 0/7 |
|
|
|
wireless_802dot11b | <boolean> | 0/7 |
|
|
|
wireless_802dot11g | <boolean> | 0/7 |
|
|
|
wireless_encrypt_wep | <boolean> | 0/7 |
|
|
|
wireless_encrypt_wpa | <boolean> | 0/7 |
|
|
|
wireless_encrypt_wpa2 | <boolean> | 0/7 |
|
|
|
Indicate what kind of transmission mode the machine used. TX: server, Rx: receiver box, Both: DVR?.
Indicate whether to support the Ethernet
Indicate whether to support the wireless
Indicate whether to support the wireless 802.11b+
Indicate whether to support the wireless 802.11g
Indicate whether to support the wireless WEP
Indicate whether to support the wireless WPA
Indicate whether to support the wireless WPA2
Group: event_i<0~2>
PARAMETER | VALUE | SECURITY | |
|
|
| (get/set) |
name | string[40] | 6/6 | |
|
|
|
|
enable | 0, | 1 | 6/6 |
|
|
|
|
priority | 0, | 1, 2 | 6/6 |
delay | 1~999 | 6/6 |
|
|
|
trigger | boot, | 6/6 |
| di, |
|
| motion, |
|
| seq, |
|
DESCRIPTION
The identification of this entry
To enable or disable this event.
Indicate the priority of this event. “0” indicates low priority.
“1” indicates normal priority. “2” indicates high priority.
Delay seconds before detect next event.
Indicate the trigger condition. “boot” indicates system boot. “di” indicates digital input.
“motion” indicates video motion detection. “seq” indicates periodic condition.