LevelOne FCS-5030 user manual Software revision upgrade

Page 43

Software revision upgrade

Customers can obtain the up-to-date software from the web site of LevelOne. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “xxx.pkg” from the appropriate product folder.

2.Run the Installation Wizard and proceed following the prompts. Refer to the instructions of the Installation Wizard on CD-ROM for details.

3.Or upgrade firmware from HTTP web page directly.

4.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

Image 43

Contents LevelOne Page Table of Contents Http Package Content To install in Ethernet Hardware installationWaterproof Process Make connectionsSoftware installation Installation How to Use Installation WizardDestination Location for Installation Page User Interface Using Installation WizardPage Action buttons Function buttons Manual Setup Change root password System SettingChange Host Name Adjust date and time PPPoE Setting Network SettingPage LAN Setting Mobile Access Apply to selected device Upgrade Device Information Select Firmware Firmware InformationStart Upgrade Update progress Add Password to prevent Unauthorized Access Initial Access to the Network CameraHow to Use Check Network SettingsAuthentication Installing plug-in Main Screen with Camera View Primary user’s capabilityPage Digital Zoom Snapshot MP4 RecordingLocal Settings Page Digital output For Best Real-time Video Images Administrator’s capabilityFine-tuning for Best Performance For Viewing by Mobile PhoneOnly Quality Images Will Do Somewhere Between Real-time and Clear ImagesOpening accounts for new use Protect Network Camera by passwordsBuild a security application Software revision upgrade Get IP address automatically & Use fixed IP address Basic-NetworkNetwork type LAN & PPPoEPage Audio and Video Video SettingsVideo orientation Audio settings Image Settings Page Privacy Mask Page System User Management Advanced-Network Ddns Rtsp Streaming Two way audioPage IP Filtering Motion detection Event Setup Event Server ServerPage Media Setting Page Recording Page Peripherals System log Maintenance Reset and restore TroubleshootingOverview URL commands of the Network CameraStyle convention Method GET/POST General CGI URL syntax and parametersSecurity level Get server parameter valuesParameter pair Groupname Set server parameter valuesReturn Available parameters on the server NTP server 489 ~Page Page Integer Name Value Security DescriptionGroup doi0~ndo-1 Group dii0~ndi-1Admin Group network Name Value Tilt Build-in ExternalZoom Cmos Providerhostna string128 String128 Logerr Logwarning Lognotice Loginfo Logdebug Description Page Audioincodec VideoincodecVideooutcodec AudiolineoutTransmissionmode Page Group serveri0~4 Name String40 Enable Priority Drive the digital output Donum Query status of the digital inputQuery status of the digital output Channel ResolutionCapture single snapshot Account managementSystem logs Http//servername/cgi-bin/admin/syslog.cgiIP filtering Upgrade firmwareRtsp SDP Page Networking SpecificationsEMI & Safety MPEG-4 AAC Technology Technology License NoticePage Liability Electromagnetic Compatibility EMCGNU General Public License GNU General Public License Page Page Page No Warranty