Harman-Kardon AVR45 owner manual Important Safety Information

Page 5

Safety Information

2

Important Safety Information

Verify Line Voltage Before Use

Your AVR45 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the unit.

If you have any questions about the volt- age requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plug- ging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electri- cal devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately with cords meeting factory specifications.

Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug, never

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some pro- tection against voltage surges and static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and sup- porting structure, grounding of the lead- in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable TV) system installer’s atten- tion to article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the ground- ing system of the building, as close to the point of cable entry as possible.

Installation Location

To assure proper operation, and to avoid the potential for safety hazards, place the unit on a firm and level sur- face. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

Make certain that proper space is pro- vided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is suffi- cient air movement within the cabinet. Under some circumstances a fan may be required.

Do not place the unit directly on a carpeted surface.

Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

Avoid moist or humid locations.

Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable compo- nents inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

The exclamation point within an

symbol, within an equilateral triangle, is

equilateral triangle is intended to

intended to alert the user to the

alert the user to the presence of

presence of uninsulated “dangerous voltage”

important operating and maintenance

within the product’s enclosure that may be of

(servicing) instructions in the literature

sufficient magnitude to constitute a risk of

accompanying the appliance.

electric shock to persons.

 

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

Image 5
Contents AVR45 AVR45 Audio/Video Receiver Table of ContentsStaple or clip original invoice here Introduction Description and FeaturesImportant Safety Information Safety InformationUnpacking CleaningTypographic Conventions Moving the Unit÷ õ Front Panel ControlsFront Panel Controls Front Panel Controls R Q P O N M Front Panel Information DisplayFront Panel Information Display C b a á ¡ àß £ ¢ Rear Panel ConnectionsRear Panel Connections Remote Control Functions Remote Control Functions OFF System Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputs ¤External Audio Power Amplifier Connections Remote Control ExtensionAC Power Connections Speaker’s manufacturerSpeaker Placement System ConfigurationSpeaker Configuration System SetupPlug the Power Cable Þto an unswitched AC outlet System Configuration Output Level Adjustment To set the delay times, follow these steps Delay SettingsPress the Set button i÷ Operation Surround Mode SelectionBasic Operation Source SelectionSurround Mode Chart Channels being decoded as follows Digital Audio PlaybackDolby Digital PCM Audio Playback Night ModeRecalling Preset Stations Preset TuningTuner Operation Tape RecordingSix-Channel Direct Input Memory BackupProcessor Reset Programming the Remote Programming the RemoteDirect Code Entry Auto Search MethodProgrammed Device Functions Code ReadoutMacro Programming Programming the RemoteRe-Assigning Device Control Selectors Volume Punch-ThroughPress the Volume Up button z Press either the AVR aor No. Button Name CD Function ListTape Aux DVDReference for Function List Manufacturer/Brand Setup Code TablesSetup Code Tables TV Realistic VCR Setup Code Tables VCR Setup Code Tables AUX DVD Cable Troubleshooting Guide Troubleshooting GuideTechnical Specifications