Intellinet Network Solutions 550000 manual Set IP Address, Subnet mask, gateway address

Network Video Server User’s Guide

1. Set IP Address, Subnet mask, gateway address.

To set the IP address, Subnet mask, and gateway address manually, you may select “manually” in combo box. In case of selecting “manually”, you can configure them with the IP installer as well as this page.

(If you have trouble configuring network system information, please ask your network administrator.)

To set DHCP, you may select ‘using DHCP’

When selecting “using DHCP”, the IP address, Subnet mask address and Gateway address may not be activated at all. Under DHCP selection, the IP address may be sent to an email address whenever IP address is changed. Users in a local network area may check the IP address through IP installer.

NOTE

If you select “DHCP”, you may see the rebooting message “Now the Network Camera is rebooting to apply the changes...” on Web Browser. After completing rebooting, Operating Status LED blinks once per second. (The message may not be changed at all so you must check whether the Operating Status LED blinks.)

To select DHCP, you must have DHCP server in the network. Otherwise, the IP address will be rebooted automatically as the previous IP address. It may take 4 minutes for booting. After rebooting, please reenter the previous IP address.

You may see the fail message from “Network Configuration” page.

2.Send IP address to e-mail

To send camera system information (Camera Name, Camera Location, DHCP IP address), check in a text box and enter you email address. (You should configure your SMTP server information first)

3.Server Port Number

To set the Port Number for the Web Server. (The default port number is ‘80’ and users can select from 80 to 1023)

4.Image Transfer Port Number

To set the port number for the image transfer. (The default port number is “8080” and users can select from 8000 to 65535)

35