Network Video Server User’s Guide
E. Updating Firmware
CAUTION
Follow the instruction as provided in this manual. During the process you must not disconnect Network Video Server from the network or power source. Otherwise your NETWORK VIDEO SERVER can be seriously damaged beyond repair.
If the Firmware Upgrade Process failed and NETWORK VIDEO SERVER does not operate properly after the upgrade, please contact your dealer or get in contact with our technical support team on the web at
Identify the version of Firmware
You can identify the version of NETWORK VIDEO SERVER’s Firmware on System Configuration Page. It is important that you first check on the Firmware version your NETWORK VIDEO SERVER has currently installed.
Follow the below steps to check the present version of Firmware
①Connect to your NETWORK VIDEO SERVER’s homepage.
② Click “Administrator Menus”.
③Move to System Configuration Page and check the Firmware Version. Also write down the Serial Number.
Download New Firmware
You can download the latest Firmware from the INTELLINET NETWORK SOLUTIONS Website
located at
Be sure to verify that the Serial Number of the camera matches the serial number given on the
selection page. Video Server’s Serial Number always starts with
59