LOREX Technology LW2100 instruction manual Installation Warnings, Installing the Camera

Page 14

Connecting the Camera

Installation Warnings:

Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.

Avoid installing the cameras where there are thick walls or obstructions between the Cameras and the Receiver*.

Select a location for the camera that has an ambient temperature between 14°F~122°F (-10°C~50°C)

*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal structures. This will reduce the range of transmission.

Installing the Camera

To install the camera:

1.Use the included mounting screws to mount the stand to the mounting surface:

Mark the position of the screw holes on the wall

Drill holes and insert the drywall plugs as needed

Firmly attach the stand to the wall

Figure 1.0 Attach stand to mounting surface

using the provided screws

 

2.Attach the camera to the mounting stand. Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews to secure the desired camera position.

3.Connect the power cable from the camera to the Power Adapter; plug the Power Adapter to an outlet or surge protector.

NOTE: You can add additional cameras (maximum of 4 cameras). When adding cameras that were not included in the original box, you will need to pair up the cameras with the receiver. Refer to the camera pairing section of this manual for more details.

Figure 1.1 Attach the camera to the stand

10

Image 14
Contents Digital Wireless Quad View Monitoring System Important Safeguards Before YOU Start Avant DE Commencer Need HELP? Necesita Ayuda Important Safeguards InstallationService UseGeneral Precautions FCC NoticeCamera Features FeaturesReceiver Features Table of Contents Wireless Camera Getting StartedWireless Receiver Connecting the CameraInstallation Warnings Installing the CameraSetting up the Wireless Receiver To connect the wireless receiver to a TV or VCRViewing Modes AutoOn-Screen Display Quad split-screen viewUsing Auto-Scan Adding CamerasSetting Dwell Time Appendix a System Specifications Receiver SpecificationsAppendix B About Digital Wireless Technology Clear Line-of-Sight Appendix C Strengthening the Range of the Wireless SignalExtending Your Wireless Signal GHZ Directional Panel Antenna GHZ Omni-Directional Antenna Troubleshooting Problem SolutionFAQ Revision Composez LA Ligne D’ASSISTANCE Sans Frais AUS Conommateurs Page See Hear Protect