On-Screen Display
1.Signal Indicator – The signal indicator shows the strength of the signal being received from the camera.
The number of bars in the Signal Indicator shows the strength of the signal – One or No Bars indicates the signal is poor, and 4 bars indicate a very strong signal.
NOTE: Signal Indicator not shown while in Quad Mode.
ATTENTION: If signal is low (e.g. 1 or 2 bars) adjust the antennas, or reposition the cameras or receiver for best performance.
Optional high power antennas are available to extend the range of the wireless signal or help the signal get
around solid objects. For more details, see page 17 of this manual, or visit www.lorexcctv.com and go to Wireless Products Solutions.
2.Channel Indicator – Displays the current channel number. Press the CHANNEL button on the Receiver to switch between available cameras.
NOTE: Channel Indicator not shown while in Quad Mode.
CH 1 |
| CH 2 |
|
|
|
CH 3 |
| CH 4 |
|
|
|
3.Status Indicator – The Status indicator message “Connecting” appears when the receiver is trying to locate a camera.
NOTE: There may be temporary signal losses for less than 1 second, due to the connection retrieval process between the Camera and Receiver (when switching between channels). This is a normal operation of the receiver.
1 2
Figure 4.0 On-screen display
Figure 4.1 Quad split-screen view
3
Figure 4.2 Connecting message
13