LOREX Technology LW1010, LW1012 instruction manual Important Safeguards, Installation

Page 3

Important Safeguards

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product.

ENG

Installation

1.Read and Follow Instructions - All the safety and operating instructions should be read before the video product is operated. Follow all operating instructions.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - Comply with all warnings on the video product and in the operating instructions.

4.Polarization - Do not defeat the safety purpose of the polarized or grounding-type plug.

oA polarized plug has two blades with one wider than the other.

o A grounding type plug has two blades and a third grounding prong.

oThe wide blade or the third prong is provided for your safety.

oIf the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet

5.Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

6.Overloading - Do not overload wall outlets of extension cords as this can result in the risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician.

7.Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the video product.

8.Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer’s instructions have been followed.

9.Attachments - Do not use attachments unless recommended by the video product manufacturer as they may cause a hazard.

10.Water and Moisture - Do not place the power cord for this video product in water.

Caution: Maintain electrical safety. Power line operated equipment or accessories connected to this unit should bear the UL, CUL, CSA, ETL or CETL Certification Mark (for North America) or the CE Certification Mark (for the European Union) on the accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel.

11.Accessories - Do not place this video equipment on an unstable cart, stand, tripod, or table.

The video equipment may fall, causing serious damage to the video product. Use this video product only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold with the video product.

Any mounting of the product should follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer.

3

Image 3
Contents Color Wireless Surveillance System Wireless Disclaimer Installation Important SafeguardsUse ServiceFCC Class B Notice General PrecautionsTable of Contents LW1010 / LW1012 FeaturesGetting Started Control Buttons Wireless ReceiverCamera Installation Wireless Receiver InstallationWall Mounting Instructions Installing the CameraConnecting Camera Power Problem Solution TroubleshootingAppendix #2 Camera Specifications Appendix #1 Receiver SpecificationsIt’s all on the web