Troubleshooting
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the following:
Problem |
| Solution |
There is no picture from a | • Check all connections to the Camera. Make sure | |
Camera. |
| the adaptor is plugged in. |
|
| • Make sure that the Cameras and Receiver are |
|
| both ON. |
|
| • Make sure that the receiver is set to search for the |
|
| Camera (using the DIP Switch settings). |
|
| • Make sure that the camera is in range of the |
|
| Receiver. |
|
| • If using the battery adaptor, try replacing the 9V |
|
| Battery |
|
|
|
There is Interference | with | • Make sure that each camera (transmitter) is within |
the Camera Picture. |
| range, and that there are no large obstructions or |
|
| interference (i.e. older cordless phones on the |
|
| 900MHz Frequency). |
|
| • Try repositioning the camera, receiver or both to |
|
| improve the reception. |
|
|
|
There are problems | with | • Ensure that the volume on the TV is ON |
the Audio. |
| • Make sure that the sound is occurring within |
|
| range of the Camera Microphone |
|
| • If the unit emits a loud screeching noise |
|
| (feedback), move the camera or receiver farther |
|
| apart. |
|
|
|
12