1. Package Contents |
| 2. Installing the Camera |
|
|
|
|
|
|
3. Connecting the Camera
1 x Weatherproof Color Day/Night Varifocal IR Dome Camera (with mounting hardware)
1 x Hex Tool for Dome Cover
1 x AC Power Adapter
1 x 60 ft. extension cable
1 x BNC to RCA Adaptor
WARNING - REGULATED 12V DC 500mA power supply is REQUIRED for use with this camera. Use of a
Features:
•True High Resolution: 1/3” CCD advanced image sensor produces video with 480 TV Lines and 380K pixels
•Varifocal
•External zoom and focus adjustments make setup easy
•Advanced Day / Night mode: Picture automatically switches camera to B&W delivering better clarity in low light conditions
•14 IR LEDs provides effective night vision range of 60 ft. (18.3m) *
•Ceiling or Wall Mountable
•Vandal Resistant Dome Can Withstand Impact from 10lb Sledge Hammer
•Weatherproof Design: Ideal for outdoor and indoor applications (IP67) **
*IR Illumination range of 60ft. (18.3m) under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.
**Not recommended for submersion in water
1.Mount the Camera Base to the Ceiling or Wall using the provided screws.
You may need to remove the Dome Cover, Dome Ring and Ball Camera from the Camera Base by loosening the tightening screws with the provided Hex Tool, located on the Dome Ring.
2.Position the camera to the desired direction and angle.
3.Position the Dome Cover over the Ball Camera. Screw the Dome Ring on, and tighten the screw using the provided Hex Tool
4.Connect the BNC end of the Camera Cable to the DVR or to a Monitor.
5.Connect the BNC end of the Camera Cable to the Extension Cable. Connect the exten- sion cable to an Observation System, DVR or to a Monitor.
5.Connect the Power end of the Camera Cable to the Extension Cable. Connect the exten- sion cable to an AC Adapter. Plug the adapter into a wall outlet.
6.Adjust the Zoom and Focus control screws on the side of the camera using a screw driver.
Zoom |
|
|
|
|
|
|
|
| Focus |
|
|
|
|
|
|
|
|
|
|
Setup Diagram:
NOTE: Test the camera prior to selecting a permanent mounting location by temporarily connecting the Cameras and cables to the system or DVR.