Standard Horizon CPF180I, CPF300I owner manual Pictures & Diagrams, Language, Mode

Language	: Allows setting the language to display chart information. The language is chosen among the list
	of languages available on the cartographic data (data cartridge or embedded charts).
Mode	: Defines how objects are translated. Selections are:
	Off	: Enables the language chosen in the Language menu above. If the selected
		language is not present on the objects information, English is used.
	English : Always uses English.
	Local	: Uses the Local language present on C-MAP BY JEPPESEN C-CARD. If no Local
		language is available, English is used.

4.After the selection is made, press [CLR] repeatedly or move the ShuttlePoint knob to the left repeatedly until the Chart page is shown.

NOTE

a.When the Chart Language is changed, the following settings are automatically selected: MODE is set to Off and Chart Language is set to your selection.

b.If the C-CARD is removed or changed, the Chart Language should be confirmed and changed if necessary.

6.0.8Pictures & Diagrams

Using optional C-MAP BY JEPPESEN MAX data cards allows you to show pictures or diagrams on the CPF180i and CPF300i display. These Pictures are typically used to facilitate the identification of cartographic objects or places around the map: they can be the landscape layout nearby a harbour, the shape of a bridge or of a buoy etc. On some objects, such as bridges, the image associated can represent the Diagram representing the shape of the objects and the various characteristics (length, height, type of bridge etc.).

Figure 6.0.8 - Pictures and Diagrams

How to show the pictures or diagrams of a Multimedia Object

They are shown on the chart page with the camera icon

Move the cursor over the camera icon. You will get the quick info on the object and there will be the camera icon on the top bar of the window:

Figure 6.0.8a - Example of Quick Info on MULTIMEDIA object

Press [IMAGE] on the CPF300i or press [ENT] for 1 second on the CPF180i to display the image on the screen; press [EXPAND] on the CPF300i or press [ENT] on the CPF180i to open the Full info on the object:

Page 56 CPF180i and CPF300i