Standard Horizon CPF300I, CPF180I owner manual Goto Mark, Goto Route

Models: CPF180I CPF300I

1 144
Download 144 pages 57.61 Kb
Page 61
Image 61

Figure 7.4a - Navigating to Cursor Example

5.Now the GPS Chart Plotter shows a bearing line between the vessels location and the destination point. A popup window shows the Distance (DST) and Bearing (BRG) from the vessels location to the destination point.

6.The GPS Chart Plotter is in Cursor mode, to switch to Home mode press [CLR] so the vessel will stay in the center of the page.

7.On the CPF300i two Soft Keys are also shown that allow you to quickly switch to the HIGHWAY page or to stop navigation.

8.To STOP Navigation, press [GOTO] and the WARNING page is shown. Select STOP and press [ENT].

7.5GOTO MARK

1.Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor) on the Chart page.

2.Press [GOTO] to show the GOTO popup window.

3.Move the ShuttlePoint knob to highlight MARK and press [ENT] to show the MARKS/ WAYPOINTS List.

4.Move the ShuttlePoint Knob to the highlight the desired Mark or Waypoint and press [GOTO].

5.You will notice a circle is drawn around the Icon Symbol. This means the GPS Chart Plotter is now navigating to the point.

6.Press [CLR] to switch to the Chart page or Highway page to start navigating to the point.

7.6GOTO ROUTE

1.Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor) on the Chart page.

2.Press [GOTO] to show the GOTO popup window.

3.Move the ShuttlePoint knob to highlight ROUTE and press [ENT].

4.The SELECT ROUTE popup window will be shown.

5.Move the ShuttlePoint knob to the highlight the desired Route and press [ENT].

6.On the Chart page a circle with a Flag is shown on the first leg of the Route and a navigation line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the Route.

CPF180i and CPF300i

 

Page 63

 

Page 61
Image 61
Standard Horizon CPF300I, CPF180I owner manual Goto Mark, Goto Route