Standard Horizon CPF300I, CPF180I owner manual Quick Info on AIS Target, AIS List, · Sog · Cog

NOTE

The CPF180i has one NMEA input - Port 1. The AIS device will be connected to Port 1, so in step 5 setup Port 1 to AIS38400. Refer to Par. 2.4 for wire connections.The CPF300i has 3 NMEA input connections any of which the AIS device may be connected to. Refer to Par. 2.4 for wire connections.

14.3QUICK INFO ON AIS TARGET

By placing the cursor over a AIS Target icon using the ShuttlePoint knob, the following information is displayed:

·Vessel Name

·MMSI number

·Radio Call Sign

·SOG

·COG

·CPA and TCPA values

NOTE

The selected AIS Target icon is surrounded by a square frame when user places the cursor over the icon.

14.4AIS LIST

It is possible to show the AIS List page that show basic information of the Target ship with the ability to select a Target ship and locate it on the chart. Follow the procedure:

1.Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2.Move the ShuttlePoint knob to highlight AIS LIST and press [ENT].

Figure 14.4 - AIS List page

3.Move the ShuttlePoint knob up or down to select the Target and scroll the page up or down. Press [ENTER] exits the page and shows the Target ship on the Chart page along with the current position of the GPS Chart Plotter.

CPF180i and CPF300i Page 97