Standard Horizon CPF180I, CPF300I owner manual Placing Cursor on the PTX Icon

Models: CPF180I CPF300I

1 144
Download 144 pages 57.61 Kb
Page 102
Image 102

Figure 16.3.0a - Example of PTX warning window on CP300

Figure 16.3.0b - Example of PTX warning window on CP180

It is possible to Goto (navigate) to the received MOBILARM PTX position (see Par. 16.4.1) or open the MOBILARM Alarm Status List page (see Par. 16.4.2). Selecting Goto or Alarm Status List will mute the Audible Alarm.

NOTE

When the same PTX is received again:

a.If the received PTX is not the active one, the user must confirm to navigate to it.

b.If the received PTX is the active one, navigation data is updated. The PTX icon appears at the new position and a pop-up warning window appears.

16.4PLACING CURSOR ON THE PTX ICON

Moving the ShuttlePoint knob so the cursor is over the PTX icon on the Chart page will show an information window and allow you to Goto the location of the PTX, delete the PTX icon or show the Alarm Status list as shown below.

Figure 16.4 - Example of PTX information window on CP300

Page 104

 

CPF180i and CPF300i

 

Page 102
Image 102
Standard Horizon CPF180I, CPF300I owner manual Placing Cursor on the PTX Icon, 0a Example of PTX warning window on CP300