Standard Horizon CPF300I, CPF180I owner manual User C-CARD Menu, Formatting the User C-CARD

11. USER C-CARD

The optional User C-CARD is used to back up Marks, Routes, and Tracks stored in your GPS Chart Plotter's memory. In the USA the User C-CARD is available directly from Jeppesen Marine at 800/424-2627. The User C-CARD is similar to a back up disk used with a PC, in case you have to clear the RAM to resolve an issue or load new software or if your CPF180i and CPF300i becomes stolen, or if you would like to transfer Waypoint, Track and Route information from one STANDARD HORIZON GPS Chart Plotter to another.

11.0USER C-CARD MENU

This optional card is similar to using a floppy disk on a PC to backup your files or to transfer the information that you have stored to a friends GPS Chart Plotter. The information shown below will assist you to transfer the User Points, Routes and Track history to the optional User C-CARD.

1Time of file creation

2Date of file creation

3Type of data contained in the file (Mark file, Waypoint file...)

4Number of selected Slot

5File name

6Number of Selected file Information on stored User

7Points on Internal Memory

4

5

6

7

SLOT 1

FILE 1

MRKS 2

WPTS 5

RTES 1

TRKS 566

SAVE LOAD DELETE FORMAT CHANGE

1

2

3

Figure 11.0 - User C-CARD Menu

11.0.0 Formatting the User C-CARD

1.Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2.Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].

3.Move the ShuttlePoint knob to highlight FORMAT and press [ENT].

4.A popup Warning window will to confirm you want to format the User C-CARD.

5.Select YES and press [ENT] to confirm (select NO otherwise). The format of User C-CARD must be done before using a new User C-CARD: this operation prepares the User C-CARD to receive and store information.

NOTE

Formatting permanently erases all files previously saved on the User C-CARD.

11.0.1 Transferring files to the optional User C-CARD

1. Remove a C-MAP BY JEPPESEN NT+/MAX C-CARD if present and insert the optional

CPF180i and CPF300i Page 75