LOREX Technology SHS-4QM Camera Installation, Installation Warnings, Camera Stand Installation

Page 14

Camera Installation

Camera Installation

Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the SHS-4QM.

Installation Warnings:

Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.

Do not install the camera in a location where it will be

Plan the cables’ route so that it is not close to power or telephone lines, transformers, microwave ovens or other electrical equipment that could interfere with the system.

Select a location for the camera that has an ambient temperature between 14°F~122°F (-10°C~50°C)

If you plan to install the camera in a location that has conditions not recommended in this manual, consult with a professional installer and consider use of a separate camera cover or housing

Before starting permanent installation, have another person hold the camera for you while you verify its performance by observing the image on the monitor.

Camera Stand Installation:

1.Attach the pedestal to the ceiling, wall or other surface by the base using the provided screws.

2.The mounting bracket must be

attached to a structural device such as a wall stud or ceiling rafter using the supplied screws.

3.Attach the camera to the

pedestal. Adjust the angle of the camera, and tighten the thumbscrew to set the position

14

Image 14
Contents Camera Video Surveillance System with Multi Camera Viewing Page Important Safeguards InstallationService General Precautions Lorex Technology INCSHS-4QM Features Table of Contents Getting Started Channel 1 / UP Button LED IndicatorsSHS-4QM Front View Channel 2 / Down ButtonFreeze / Autoscan Button Channel 4 / Right ButtonQuad / Menu / ESC Button SHS-4QM Rear View Remote Control SHS-4QM Cameras Camera Lens StandCamera Stand Installation Camera InstallationInstallation Warnings Connecting Cameras Power Connecting the SHS-4QM Video CableConnectivity Diagram TV / VCR / MonitorSetup Menu Setup Menu SetupSystem Setup System SetupAuto Sequence Display SetupDisplay Setup Auto SequenceCamera Setup Camera SetupMotion Setup Motion Setup CameraEvent Setup Event ReportEvent Report Camera Specifications SHS-4QM System Specifications Appendix #1Control Box Specifications It’s all on the web Product Information