LOREX Technology SC21CD5444UQ-A80 manual Standard Wired Camera, Installation

Page 22

STANDARD WIRED CAMERA:

2

1

3

5

4

1.Camera Lens – Delivers high quality image by using a 1/4” CCD Image Sensor

2.Speaker – Delivers sound from the monitor to the camera

3.Camera Input – Connects cable to the monitor

4.Bracket – Metal bracket connects to camera for mounting to walls, ceilings or table

5.Microphone – Picks up sound around the camera

INSTALLATION

A. Camera Unit

Permanent installation using metal camera bracket

IMPORTANT NOTE:

Keep camera installed away from direct sunlight. Also avoid places where humidity

is high or unable to protect from rain. The mounting bracket must be attached to a structural device such as wall stud or ceiling rafter using suitable fastener.

-18-

Image 22
Contents Color Quad DVR Combo With 80GB HDD For More InformationRisk of Electric SHOCK. do not Open FCC Class B Notice Contents General Precautions Read InstructionsPage System Includes Getting Started Control Front Panel Single PIP Dual PIPRemote Control Sensor Pause / Stop / FF / REW / PlayPlay AlarmMicrophone RECMain Menu Control Sequence SET Page Page OFF Full List Alarm ListPlayback Search SET Time SearchPlayback Options PAN / Tilt Zoom Control Back Panel Remote Control KEY Function DescriptionStandard Wired Camera InstallationWhen you attach the dome to the adapter plate Dome CameraCamera Installation Camera 1- 4 InputsTrouble Shooting Technical Specifications MonitorOptional Accessories CameraAppendix #1 Installing the HDD Connect the HDD into the Cartridge Casing Lock the Cabinet Appendix #2 Connection to a Slave Monitor & Standard VCR Appendix #3 Typical Configuration for a Complete System Appendix #4 RS232 Remote Protocol Appendix #5 Recording Time in hours Quality / Frame Best High Normal RateAppendix #6 Recording Time gigabytes per hour Care and Maintenance