2.SEQUENCE SET - This submenu allows you to select how long you’d like each channel to appear
NOTE : Channels without a camera, a Video Loss, or a Dwell Time of zero will be skipped in sequencing.
3.TITLE SET - This submenu allows you to change the title of each camera location (up to 8 characters), or remove the titles from the
(i)DISPLAY : Selecting [Y] will enable the camera titles to appear in the
(ii)CH 1 - 4 : Change the titles of each individual camera.
| [SEQUENCE SET] | ||
QUAD | : [03 SEC] | ||
CH 1 | : [03 SEC] | ||
CH 2 | : [03 SEC] | ||
CH 3 | : [03 SEC] | ||
CH 4 | : [03 SEC] | ||
RETURN |
| : [ | ] |
EXIT |
| : [ | ] |
|
|
| |
|
|
|
|
|
| [TITLE SET] | |
DISPLAY |
| : [Y] |
|
CH 1 | : [CAMERA01] | ||
CH 2 | : [ | C2 | ] |
CH 3 | : [ | C3 | ] |
CH 4 | : [ | C4 | ] |
RETURN |
| : [ | ] |
EXIT |
| : [ | ] |
|
|
|
|
4.ALARM SET - This submenu allows you to enable / disable the camera’s PIR Alarm function by channel. The PIR motion sensor is not included with the 3 observation cameras, but it is available as an accessory (model ACC1401).
Note: The dome camera does not have the PIR motion detection feature
(i)ALARM : Selecting [OFF] disables PIR motion detection from triggering any alarm. Selecting [OSD] will allow alarms to be triggered, and the letters “AL” will appear on the screen of the camera location where the alarm is taking place. A third option, [OSD+BUZZER] will both display “AL” and emit a buzzer sound in the event of an alarm.
(ii)CH
Note: Some alternative brand PIR motion sensors have a default setting of N.C (normally closed). In order to activate the alarm on such a PIR motion sensor, change the setting to N.C
5.MOTION SET - This submenu allows you to enable / disable the
(i)MOTION : Selecting [OFF] disables the
(ii)CHANNEL : Select which channels will have the Pixel Motion Sensing feature activated. The Sensitivity level can be set to zero for a channel, which will disable the Motion Sensing ability for that channel.