LOREX Technology SC21CD5444UQ-A80 manual Control Front Panel, Single PIP Dual PIP

CONTROL - FRONT PANEL:

14 13 12 11 10

HDD
HDD					MIC
FULL
ALARM
CH1	CH2	CH3	CH4	QUAD
PLAY
REC					POWER/TIMER
SEQ	MENU	TALK	EVENT	SEARCH	REC
PIP	A-SEL

1 2 3 4 5 6 7 8 9

1.Removable Cartridge Casing

The built-in DVR comes with a removable hard disk drive tray.

2.PIP / SEQ - this button performs two functions:

(1)PIP : Holding this button for 3 seconds triggers the Picture-In-Picture display. PIP allows you to view two camera locations simultaneously, one being the main channel, the other being viewed as a sub-picture. Dual PIP can also be selected, which displays two sub-pictures as illustrated below.

SINGLE PIP DUAL PIP

To change between Single PIP and Dual PIP, repeatedly press the PIP button.

To swap the positions of cameras appearing in PIP (between the Main and Sub screen), hold this button for 3 seconds. To exit PIP mode, press the QUAD button.

(2)SEQ : Used to sequence between all camera locations in full screen in sequential order with the screen automatically switching. Press SEQ again to stop sequential viewing. Sequence settings are programmable via the Menu, refer to page 9 for more details.

3.A-SEL / MENU - This button performs two functions:

(1)A-SEL:In Quad mode, you can select the channel with audio. Pressing this button automatically changes the audio from channel to channel. An audio microphone symbol will appear in the corner of a Quad screen to indicate audio is available on a particular channel.

(2)MENU: Holding this button for 3 seconds brings up the Main Menu. Please refer to page 8 For more information on Menu options.

4.TALK - By pressing and holding this button the user has the ability to talk to a specific camera location. This button must be pressed the entire time, while talking. To listen to the camera location, release the Talk button.

-5-