DOME CAMERA:
4
2
1
3
1.Camera Lens – Delivers high quality image by using a 1/4” Color CCD Image Sensor
2.Plastic Bubble Housing - Smoked acrylic housing protects lens and provides an unobtrusive appearance
3.Camera Input – Connect cable to the back of the monitor
4.Microphone – Picks up sound around the camera
INSTALLATION
A. Camera Unit
Permanent installation using metal camera bracket
| 1.) | Connect the 65 ft Din cable (included with the dome |
|
| camera) to the wired lead of the dome camera |
| 2.) | Attach the adaptor plate on the ceiling or wall, using |
|
| the 3 screws provided (M3X20 screw). |
M3 | 3.) Twist the base of the dome camera on to the | |
| ||
|
| adaptor plate on the ceiling or wall. |
|
| Note: Do not hold the clear plastic bubble or swivel |
|
| when you attach the dome to the adapter plate |
| 4.) | Connect the other end of the 65 ft cable to the |
|
| Camera input on the back of the monitor |
| 5.) | Connect power to the observation system |
IMPORTANT NOTE:
Keep camera installed away from direct sunlight. Also avoid places where humidity
is high or unable to protect from rain. The mounting bracket must be attached to a structural device such as wall stud or ceiling rafter using suitable fastener.