Remote Function Table, Ext, Programmable Stop CD

2.2 Remote Function Table

This table supplements the infor- mation you’ve just read. Use it to quickly review button functions. The controller’s capabilities are extensive and may be somewhat intimidating at first. However, you will soon find that its logical button arrangement and programming capabilities will greatly increase your enjoyment as you dis- cover the ease with which you can operate your entire system from just one remote!

Look down the left-hand column until you see the button you want to learn about. Then look under MAIN to see if it is pre programmed for a GTP-

860II function, under CD to see what CD commands are pre programmed, and under TUNER to see all pre pro- grammed tuning functions.

NOTES: Direct sunlight or very bright ambient lighting may affect the oper- ating range and angle for the remote control handset.

The infrared remote control command receiver, located to the right of the Power button, receives commands from the remote control. There must be a clear line-of-sight path from the remote control to this window; if that path is obstructed, the remote con- trol may not work.

BUTTONS

MAIN

VID 1

VID 2

VID 3

VID 4

VID 5

TUNER CD POWER MUTE VOLUME UP VOLUME DOWN TAPE

EXT 5.1

D.RANGE STOP MODE PAUSE PLAY SETUP/UP RIGHT DOWN

Main

Selects Main

Selects Video 1

Selects Video 2

Selects Video 3

Selects Video 4

Selects Video 5

Selects Tuner Selects CD Power On/Off Mute Volume Master Volume Up Master Volume Down Selects Tape Selects Ext 5.1 Dynamic Range adjust Not programmable Surround Mode Select Not programmable Not programmable Not programmable OSD Right Select OSD Scroll Down

Selects Main

Selects Video 1

Selects Video 2

Selects Video 3

Selects Video 4

Selects Video 5

Selects Tuner

Selects CD

Power On/Off

Mute Volume

Master Volume Up

Master Volume Down

Programmable

Stop CD

Surround Mode Select

Pause CD

Play CD

Programmable

Skip Ahead

Programmable

Tuner

Selects Main

Selects Video 1

Selects Video 2

Selects Video 3

Selects Video 4

Selects Video 5

Selects Tuner

Selects CD

Power On/Off

Mute Volume

Master Volume Up

Master Volume Down

Programmable

Surround Mode Select

Programmable

All Others

Selects Main

Selects Video 1

Selects Video 2

Selects Video 3

Selects Video 4

Selects Video 5

Selects Tuner

Selects CD

Power On/Off

Mute Volume

Master Volume Up

Master Volume Down

Programmable

Surround Mode Select

Programmable

continued on opposite page.

18 ADCOM GTP-860 II Owner’s Manual