Vivotek ST7501 manual How to Configure Client Settings, Snapshot Settings

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

How to Configure Client Settings

In Client Settings, you can configure Snapshot Settings, AVI Settings, View Settings, and General Settings. It allows you to save snapshots and AVI files on "local computer (client side,

not server side)."

Snapshot Settings

Please follow the steps below to configure snapshot settings:

a. Click Configuration > Client Settings > Snapshot Settings on the menu bar to open the Snapshot Settings window.

b. Select a picture format for snapshots (BMP or JPEG). If you select JPEG format, you can adjust the value of recompression quality (from 1 to 100). Note that higher value would generate higher picture quality but lower compression rate.

c. Enter a descriptive Prefix for the filenames of snapshots.

d. The default storage path for snapshot is C:\Program Files\Vivotek Inc\ST7501\Client\LiveClient\ Snapshot. If you want to change the storage path, click Browse to select another folder.

e

b

c

d

The recompression quality is only enabled in MPEG-4 streaming. If your stream source is MJPEG, the system will directly save the JPEG image without recompression.

e. If you check Generate a file name automatically, ST7501 will directly save snapshots with filename in the following format to the storage folder.

Snapshot_20080825_173015_01.jpg

File name prefix Date and time		Picture format
	(YYYYMMDD_hhmmss)
		Serial number of snapshots

58 - User's Manual