1.3 Hardware Description and Features
Lens
VGA CCD sensor with fixed focus lens.
Microphone
Monitor or record sound using the
Power Button
Turn the camera on or off. When the power button is held down while the camera is on for 6 seconds the camera settings will reset to the factory defaults.
The power button light will blink when video is being streamed.
Rear Connections | External Microphone Connection Port | |
| ||
| Connect a standard 1/8” (3.5 mm) computer | |
Network Activity LED | microphone* into this port to monitor/record | |
audio further away. (Optional) | ||
The green LED indicates if | ||
| ||
there is a connection to your | Motion Sensor Jack | |
network and router. If there is | ||
Connect an external motion | ||
network activity, the green | ||
sensor* to trigger email alerts | ||
LED will blink. | ||
with images attached. See the | ||
| ||
| motion detection section for | |
| more information. (Optional) | |
Used to connect the Observer |
| |
to your LAN using the included |
| |
Ethernet cable. |
|
| External Power Connector | |
Observer - Connections | Connect the included power | |
supply. | ||
| ||
* (External microphone and motion sensor sold separately) | Warning: Use only the | |
included power supply | ||
| ||
IP Address Display | or you may damage | |
your camera. | ||
|
IP Address LCD
The LCD will indicate the last three digits of your IP Address. For example, if the IP Address “192.168.0.123” is assigned to the Veo Observer Camera, the LCD will display “123.” Refer to Section 2.2 Getting an IP address for more information.
Page 6 of 65