Back-Up Battery Installation and Removal - continued
Position the back-up battery in the cradle per the illustration below, taking care to make sure the (+) mark on the battery is facing up, toward the lens of the camera. Gently push the cradle back into the camera until end tabs snap into place.
Note: If the back-up battery charge is low or no back-up battery is in the camera , the bbL symbol will appear in the LCD screen for a few seconds when the camera is first turned on. The camera will not allow you to take pictures without a CompactFlash card installed if the back-up battery is low. Pictures must be taken on a CompactFlash card if the back-up battery is low or not installed.
10
