Vivotek FD6111V, FD6121V manual Set server parameter values, Nosync

Set server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/setparam.cgi? [nosync=<value>&]<parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

parameter	value		description
nosync	0, 1		Specifies that there should be no sync (write) of
			the corresponding configuration file on flash. If
			parameter is omitted, a sync write will occur.
			(note: this parameter must be put at begin of
			parameter list)
<group>_<name>.	value	to	Assign	<value>	to	the	parameter
	assigned		<group>_<name>..
return	<return page>		Redirect to the page <return page> after the
			parameter is assigned. The <return page> can
			be a full URL path or relative path according the
			the current path. If you omit this parameter, it
			will redirect to an empty page.
			(note: The return page can be a general HTML
			file(.htm, .html) or a Vivotek server script
			executable (.vspx) file. It can not be a CGI
			command. It can not have any extra
			parameters. This parameter must be put at end
			of parameter list)

- 64 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532