Vivotek FD6111V, FD6121V manual Network Settings, General

Page 40

Network Settings

Any changes made on this page will need to restart the system in order to validate the

changes. Make sure every field is entered correctly before clicking on .

"Get IP address automatically" & “Use fixed IP address”

The default status is “Get IP address automatically”. This can be tedious having to perform software installation whenever the Network Camera starts. Therefore, once the network settings, especially the IP address, have been entered correctly, select “Use fixed IP address” then the Network Camera will skip installation at the next boot. The Network Camera can automatically restart and operate normally after a power outage. Users can run IP installer to check the IP address assigned to the Network Camera if the IP address is forgotten or using the UPnP function provided by the Network Camera (MS Windows XP provides UPnP function at My Network Place). As for how to get IP address automatically, please refer to the section of Software Installation.

General

“IP address” This is necessary for network identification.

“Subnet mask” It is used to determine if the destination is in the same subnet. The default value is “255.255.255.0”.

“Default router” This is the gateway used to forward frames to destinations in different subnet. Invalid router setting will fail the transmission to destinations in different subnet.

“Primary DNS” The primary domain name server that translates hostnames into IP addresses.

“Secondary DNS” The secondary domain name server that backups the Primary DNS.

- 36 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532

Image 40

Contents Page Technical@vivotek.com Sales@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Appendix886-2-82455282 886-2-82455532 Hardware Installation Ethernet ConnectionMount the Camera 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Software Installation 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewClient Settings Both886-2-82455282 886-2-82455532 Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will DoSomewhere Between Real-time and Clear Images Select for Motion JpegProtect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 886-2-82455532 Definitions in Configuration System Parameters User Group Administration 886-2-82455282 886-2-82455532 Edit User Network Settings GeneralHttp Streaming886-2-82455282 886-2-82455532 Ddns & UPnP 886-2-82455282 886-2-82455532 Mail & FTP Smtp886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Video Codec Parameters 886-2-82455282 886-2-82455532 Image Settings Contrast, HueCamera Settings Audio 886-2-82455282 886-2-82455532 Motion Detection 886-2-82455282 886-2-82455532 Weekly Schedule Application SetupEvent Operation Sequential Operation Naming rule of snapshot file FTP886-2-82455282 886-2-82455532 Viewing System Log Factory DefaultViewing System Parameters Troubleshooting AppendixFrequently Asked Questions 886-2-82455282 886-2-82455532 886-2-82455282 886-2-82455532 Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Example request IP address and it’s response Set server parameter values NosyncWirelessNetwork Camera With Pan/Tilt/Zoom Available parameters on the serverYyyy/mm/dd Skip to invoke default serverHhmmss Blank 192.168.0.99 255.255.255.0Than 40 characters Mailto2 Text String 5002 5003120 384000 For Ntsc only8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Application page CGI command Script.vssx886-2-82455282 886-2-82455532 Sun Resetdo Drive the digital outputQuery status of the digital input Query status of the digital output Capture single snapshot Account management System logs Privilege=dido&privilege=listenConfiguration file System Information886-2-82455282 886-2-82455532 Technical Specifications System AudioElectromagnetic Compatibility EMC