Vivotek IP3135 manual Software revision upgrade

Page 30

Software revision upgrade

Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

1.Download the firmware file named “FLASH.BIN” from the appropriate product folder.

2.Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the Upgrade Wizard for details.

3.The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network Camera cannot restart properly, ask your dealer for technical service.

- 28 -

www.vivotek.com

Image 30

Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Page Package Contents Hardware installation Software installationInitial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewDigital Zoom Client settings SnapshotPage Url http//Network Camera/protocol.html Administrator’s capability Fine-tuning for Best PerformanceOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersChange homepage layout How to change the font color Page Page Page How to design my own homepage to replace the current one Page Demo on multiple sites mid-scale service Build a multimedia web attraction sitePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings GeneralFTP Streaming Ddns and UPnP settings Video codec parametersPage Page Motion detection Send out the snapshot while motion detection Application settingsWeekly schedule Sequential operationPage Homepage layout settings Factory default Viewing system logViewing system parameters Troubleshooting Reset and restoreStatus LED Frequently asked questions Page Page Restore factory default settings URL commands of the Network CameraCapture update Snapshot of Jpeg image Restart systemURL System resource URLGeneral format of command URL System configuration URLSecurity configuration URL Network configuration URLPassword for secondary Smtp server Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Application configuration URL Homepage layout configuration URLPage Technical specifications NetworkingElectromagnetic Compatibility EMC Liability