Vivotek IP3135 manual Hardware installation, Software installation

Page 7

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera.

Hardware installation

Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.

Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.

Upon powering up, the device runs through a self-test procedure and the front LEDs will blink between green and red a few times. If self-test passes, the LED will be green and the Network Camera will standby for getting IP address. After getting IP Address, the LED will blink green every second. If self-test fails the red LED will blink several times. Refer to Appendix A for troubleshooting.

Software installation

At the end of the hardware installation, users can use Installation Wizard program included in the product CDROM to find the location of the Network Camera. There may be many Network Cameras in the local network. Users can differentiate the Network Cameras with the serial number. The serial number is printed on the labels on the carton and the back of the Network Camera body. Please refer to the user’s manual of Installation Wizard for detail.

- 5 -

www.vivotek.com

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Technical@vivotek.com Before You Use This Product Table of Contents Page Package Contents Software installation Hardware installationCheck Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityDigital Zoom Snapshot Client settingsPage Url http//Network Camera/protocol.html Fine-tuning for Best Performance Administrator’s capabilityOnly Quality Images Will Do Opening accounts for new users Protect Network Camera by passwordsChange homepage layout How to change the font color Page Page Page How to design my own homepage to replace the current one Page Build a multimedia web attraction site Demo on multiple sites mid-scale servicePage Image URL Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings General Network settingsFTP Streaming Video codec parameters Ddns and UPnP settingsPage Page Motion detection Sequential operation Application settingsWeekly schedule Send out the snapshot while motion detectionPage Homepage layout settings Viewing system log Factory defaultViewing system parameters Reset and restore TroubleshootingStatus LED Frequently asked questions Page Page Restart system URL commands of the Network CameraCapture update Snapshot of Jpeg image Restore factory default settingsSystem resource URL URLSystem configuration URL General format of command URLNetwork configuration URL Security configuration URLPassword for secondary Smtp server Ddns & UPnP configuration URL Video configuration URL Image quality configuration URL Homepage layout configuration URL Application configuration URLPage Networking Technical specificationsLiability Electromagnetic Compatibility EMC
Top Page Image Contents