AGFA DC-530i Inserting the Memory Card, Insert the card, Tips, About Camera Memory, DCF Protocol

Page 11

Inserting the Memory Card

You can use SD Card or MMC Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment.

1 Open the battery cover.

ySlide the battery cover in the direction indicated by the arrow.

2 Insert the card.

yInsert the card with the label facing up and the arrow pointing in.

Tips

yTo remove the card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.

3 Close the battery cover.

Caution

yIf insert or remove the card while the camera is power on, it may be damages the card or data.

yDo not touch the connection terminals on the back side of the card.

About Camera Memory

This camera is equipped with internal memory. If the memory card is not inserted in the camera, all images and movie clips recorded by the camera will be stored in the internal memory. If the memory card is inserted, images and movie clips are stored on the memory card.

DCF Protocol

The DCF protocol defines the format for image file data as well as the directory structure for the memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible cameras from other manufacturers.

6

Image 11

Contents DC-530i Extending battery life Precautions„ FCC Compliance and Advisory Iii ContentsMaking Connections Getting Started Using This MenuAttaching the Wrist Strap Scope of delivery Parts of the Camera Page Inserting the Batteries Low Battery IndicatorAbout Battery Type About Camera Memory Inserting the Memory CardInsert the card TipsSetting the Date & Time Setting the Display Language / Date & TimeSetting the Display Language Apply the setting REC mode Using the LCD MonitorDpof Play modeChanging the LCD Status „ REC mode„ Play mode Basic Operation Turning the Power On and OffPress the Power button n again to turn the power off Power Saving FunctionSet the camera to the REC mode Launch the mode palette Changing the ModeSwitching between REC mode and Play mode Selecting the REC modePage Select an item Using the MenusChange the setting REC menuPress the Menu n button to close the menu Setup menuOpen the Setup menu REC menu list MovieOff Setup menu listReset BeepNiMH PALComputer / Printer Take a picture Basic RecordingRecording Still Images Half press the shutter button to focus the imageUsing the Q mode Quality Values Setting the Resolution and QualityResolution Values Recording Movie Clips Setting the Movie SizeUsing the Zoom Function Using the Flash Using the Macro Burst Using the Self-timer & Burst10 sec DoublePress the shutter button again to end recording Recording and Playing VoicesRecording Audio Clips Playing Back Audio ClipsPress the SET button to start recording for 30 seconds Adding a Voice MemoRecording a Voice Memo Open the Play menuOther Recording Functions Setting the MeteringSetting the White Balance Setting the Highlight Setting the ISOSetting the Exposure Setting the AEBSetting Date Stamp Setting the SharpnessSetting the Photo Effect Press the four-way control or n Turn the power on, and set the camera to the Play modePlayback Playing Back ImagesSave the image Magnifying & Trimming Still ImagesMagnify the image Trim the imagePlaying a Slide Show Change the slide show settingsViewing in Thumbnail Button to show the selected image in full screenDeleting a Single File Deleting FilesPlaying the slide show Delete images Deleting Multiple FilesPress or to select Select, and then press the SET button Select multiple imagesProtecting All Files Play mode Open the menuProtecting a Single File Thumbnail screen Open the menu Press or to select Lock all, and then press the SET buttonPress the SET button to protect all images Protecting Multiple FilesChanging the Image Size Editing ImagesRotating Still Images Press the SET button to rotate the imageChanging the Image with Effects Copying the FilesPrint the date stamp out Setting the DpofS3 Press or to select Single, then press the SET button Choosing a Startup Image Display on TV Connecting the Camera to a TVMaking Connections Connecting the Camera to a Computer with the USB Cable Connecting the Camera to a PCUsing the Card Reader System Requirements Software InstallationDouble-click the Removable Disk icon to view its contents Utilities Drivers Installing the SoftwareInstall Ulead Photo Explorer 8 SE Basic Install VideoStudio 7 SE VCDDrive. The autorun menu appears Installing the Software DriverInstalling Ulead Photo Explorer 8 SE Basic Follow the on-screen instructions to install the driversUlead Photo Explorer 8 SE Basic Installing VideoStudio 7 SE VCDUsing the Software File Naming AppendixAbout the Folder & File Name Folder StructureProblem Cause Solution TroubleshootingFunction Available List Mode FunctionStill Capture Ntsc / PAL SpecificationsManufactured by plawa-feinwerktechnik GmbH & Co. KG Customer careDeclaration of Conformity