Network Setting
Internet Camera Name | The default camera name is “IPCamera_MJPEG”. It is |
| recommended to name a meaningful name for the camera. |
IP Address | Enter an unused IP Address within the IP address range used on |
| your LAN. If the IP Address of your LAN is from the 192.168.2.1 |
| to 192.168.2.254, you can set an unused IP Address from the |
| range for the camera, for example: 192.168.2.250. |
Subnet Mask | The Subnet Mask field must match the subnet setting on your |
| LAN. For example: 255.255.255.0. |
Gateway | The Gateway is used to forward frames to destinations in a |
| different subnet on the Internet. The Gateway setting must be the |
| same with the gateway used by the PCs on your LAN. |
DNS Server | DNS Server (Domain Name Server) that translates names to IP |
| addresses. Set the same DNS Server as the PCs on your LAN. |
|
|
16