Mail Address, Smtp Server, IP Address | Edimax Technology IC-1000

E-Mail Address	Set up the E-Mail account as the receiver for the snapshot
	picture.
SMTP Server	Specify the SMTP mail server for sending E-Mail.
Apply	When you finish the “E-Mail Setting”, click “Apply”.

IP Information
IP Address	Enter an unused IP Address within the IP address range used on
	your LAN. If the IP Address of your LAN is from the 192.168.2.0
	to 192.168.2.250, you can set an unused IP Address from the
	range for the camera, for example: 192.168.2.250.
Subnet Mask	The Subnet Mask field must match the subnet setting on your
	LAN. For example: 255.255.255.0.
Gateway	The Gateway is used to forward frames to destinations in a
	different subnet on the Internet. The Gateway setting must be the
	same with the gateway used by the PCs on your LAN.
DNS Server	DNS Server (Domain Name Server) that translates names to IP
	addresses. Set the same DNS Server as the PCs on your LAN.
Video Port	The Video Port is used to transmit or receive the video streaming
	in the network. The default port setting is “4321”. If you want to
	view the video from the camera, the port setting should be
	correct.
Web Port	This camera support web connection, the default web port is 80.
	Since the web server may use port 80, you can use a different
	port for the camera. If you change the web port from 80 to 8080,
	you must type http://192.168.2.3:8080 to connect the camera
	through the web browser.
Apply	When you finish the “IP Information”, click “Apply”.
	43

E-Mail Address