Camera Information
Camera Name | The default camera name is “IPCamera_MJPEG”. It is |
| recommended to name a meaningful name for the camera. |
Firmware | Display the current firmware version of the camera. |
Apply | When you finish the “Camera Information”, click “Apply”. |
|
|
DDNS Service |
|
Enable/Disable | Enable or disable DDNS function of the camera. |
Provider | Several companies provide DDNS service. This camera supports |
| the service from DynDNS company. |
Domain Name | The domain name given by DynDNS is |
| “registername.dyndns.com”. Enter the domain name that you |
| register for the camera from DynDNS web site. |
Account | Enter the login name for the DDNS service. |
Password | Enter the password for the DDNS service. |
Apply | When you finish the “DDNS Service” setting, click “Apply”. |
|
|
UPnP |
|
Enable/Disable | Enable or disable UPnP function of the camera. |
Apply | When you finish the “UPnP” setting, click “Apply”. |
|
|
Maintenance |
|
Reset to Defaults | To reset the camera to factory default, click “Apply”. Then, follow |
| the instruction of the screen to complete the process. The factory |
| defaults are as follows. |
| Camera Name: “IPCamera_MJPEG” |
| IP Address: “192.168.2.3” |
| Subnet Mask: 255.255.255.0 |
| Administrator Name: “Admin”, Password: “1234” |
|
|
| 44 |