2.3.2 MPEG4
If you selected „MPEG4‟ as the video encoding format of this IP camera, you can specify the parameters of MPEG4 video encoder here.
The descriptions of every setting in this menu will be given below:
Item | Description |
Video Resolution | Specify video resolution of MPEG4 video encoder. |
| Available options are XGA, VGA and QVGA resolution |
| under mega pixel mode, VGA, QGVA and QQGVA under |
| Normal mode. VGA resolution provides more details than |
| QVGA, but requires more network bandwidth. |
|
|
Video Quality | Specify video encoding rate of MPEG4 video encoder by |
| either CBR or VBR.CBR available options are from |
| 200Kbps to 2Mbps. VBR available options are from |
| highest to lowest. Greater video bit rate provides better |
| video quality, but requires more network bandwidth. |
|
|
Video Frame | Specify video refresh rate of MPEG4 video encoder. |
Rate | Higher video refresh rate provides more details about |
| motion, but requires more network bandwidth. |
| CAUTION: Choosing a low frame rate will save |
| bandwidth, but may not be able to capture every motion if |
| the object that IP camera points to is moving fast. |
|
|
Click „Apply‟ to save settings and make the new settings take effect.
39