Edimax Technology IC-3010WG manual Short, you may receive too much unnecessary images

	is happened between time interval; if the time interval is too
	short, you may receive too much unnecessary images, and
	consumes too much disk
	This option allows the IP cam to capture additional image
	frames prior to the event. The duration of pre-recording is
Pre Recording	based on the settings of Resolution, Video Type, and Frame
Time	Rate and estimated by the IP cam automatically. For
	example, if the Resolution is 640x480@MPEG4 and Frame
	Rate is 15fps, the pre-recording time is about 2 sec.
	Select the duration you wish this camera to record image
	when a motion is detected from dropdown menu. The
Post Recording	available option of the duration is based on the settings of
Time	Resolution, Video Type, and Frame Rate. For example, if
	the Resolution is 640x480@MPEG4 and Frame Rate is
	15fps, the available options of are 1, 2, and 3 (second).
Send Recording	Select „Yes‟ to send a picture to the Email address you
	specified in „E-Mail & FTP‟ menu when a motion is
File to Email
	detection, and select „No‟ to disable this function.
E-Mail Subject	Set the subject of Email being sent here. This will help you
	to distinguish the Email sent by this IP camera from others.
Send snapshot	Select „Yes‟ to send a picture to the FTP server you
	specified in „E-Mail & FTP‟ menu when a motion is
file to FTP
	detection, and select „No‟ to disable this function.

Click „Apply‟ to save settings and make the new settings take effect.

48