Edimax Technology IC-3010WG manual

2.5 Motion Detection

Motion detection function makes this IP camera become your non-stop guard. You don‟t have to waste all the time monitoring the images from the camera, and camera will detect all motions for you. Once motion is detected, a captured image or video recording will be sent to you by Email or via FTP.

You can access this menu by clicking „Motion Detection‟ on the top of web management interface.

2.5.1 Motion Detection Settings

You can use this menu to setup basic motion detection settings:

The descriptions of every setting in this menu will be given below:

	Item		Description
Motion Detection		Select „Enable‟ to enable motion detection, and select
Enable			„Disable‟ to disable this function.
			Specify the time interval between two motion detections in
			seconds. If a motion is detected after last detection time,
Next Event			and before next detection time, nothing will be send by
			Email or via FTP.
Detected Interval
			Please specify a time interval that suites your need. If the
			time interval is too long, you may not be able to know what
		47