2.7.4 Utilities
This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off.
The descriptions of every setting in this menu will be given below:
Item |
| Description |
Upgrade |
| If you downloaded latest firmware file from our website, |
Firmware |
| you can click „Browse‟ button to pick the firmware file you |
|
| wish to use. Then click „Upgrade‟ button to start firmware |
|
| upgrade procedure. |
|
| It‟s recommended to use wired Ethernet connection |
|
| when you use this function, and DO NOT DISCONNECT |
|
| OR CLOSE WEB BROWSER DURING UPGRADE! |
|
|
|
Reset |
| Clear all settings in the camera. Please think again |
|
| before you do this, and then click this button to reset all |
|
| settings. |
|
| NOTE: IP address will be reset to default value |
|
| „192.168.2.3‟ also. You‟ll need to change the IP address |
|
| setting of your computer if the IP address of your |
|
| computer does not begin with „192.168.2‟, and subnet |
|
| mask is not „255.255.255.0‟, or you‟ll not be able to |
|
| connect to this IP camera again. |
|
|
|
Reboot Device |
| If you found the IP camera is responding slowly or |
|
| behaves strange, you can click this button to try to reboot |
|
| the IP camera, this may help. |
|
|
|
LED Setting |
| Switch the LED light of this IP camera off, so „LAN‟ and |
|
| „WLAN‟ LED on the IP camera will stop working, in case |
|
| you don‟t want other people know the camera is |
|
| transferring data. |
|
|
|
| 58 | |